ABIT BX133 RAID Motherboard Portland OR

ABIT have release a new motherboard based on the famous BX Chipset with ATA-100 IDE controller with built in RAID capabilities. To learn about the ABIT BX133 RAID, read the following article.

Local Companies

Manage x Solutions
503 306 1683
3607 NE 78th
Portland, OR
FLAT RATE COMPUTER REPAIR
503-839-9115
not available
Portland, OR
Flat rate computer repair
50-3839-9115
na
Portland, OR
FLAT RATE COMPUTOR REPAIR
na
na
Portland, OR
UniTech Portland Laptop Repair
503-297-3901
8835 SW Canyon Lane Suite 302
Portland, OR
Cartridge World
(503) 231-7900
3962 SE Hawthorne Blvd
Portland, OR
Pirie & Co
(503) 231-3720
Portland, OR
Northwest Laser Llc
(503) 248-2200
Portland, OR
Image Perfect Inc
(503) 226-0800
Portland, OR
Branch Distributing Inc
(503) 231-7161
3384 SE 20th Ave
Portland, OR



Introduction



By now all of you out there in overclocker land should know the name ABIT and some of you during your overclocking days most likely would have used an ABIT board but if you have been living on another planet and don’t know who ABIT are here is a quick run down.

ABIT is one of Taiwan’s largest motherboard suppliers. Although you won’t find many of their boards in computers like DELL, Compaq or IBM you will find them in just about every overclocked system. ABIT stated it overclockers run way back in the days of the old LX chipset with the innovative BIOS jumper system or Softmenu II as ABIT call it. When Intel’s power packed chipset known as the BX (82443BX to give its reference name) was released ABIT took advantage of this by making some very nifty overclockers motherboards. The first real success story for ABIT was the BH6 and BX6. Both were designed on the 440BX chipset and featured ABit’s Softmenu II software jumper system making it easy for anyone to overclock the CPU in the BIOS system, CPU multiplier, core voltage and even I/O voltage was changeable in BIOS, this was a super idea for before the days of the jumperless setup if you wanted to overclock you had to take of the cover, get your user manual out, locate the jumpers and try and set them to the right settings without loosing the jumper caps inside the PC, I can tell you all it can be quite a nightmare when you keep dropping them. The success of the BX chipset meant success for ABIT with 10 very good quality motherboards. When ATA-66 came out ABIT were the very first company to add an onboard ATA-66 controller to the BX motherboards, ABIT BE6 for slot 1 and BP6 for dual socket 370. This proved to be a good selling point for ABIT as now you could add up to 8 IDE devices to your motherboard. When Intel released the I8xx series chipset the BX sat in the backbench for ABIT until now. ABIT have released a motherboard based on the famous BX Chipset with ATA-100 IDE controller with built in RAID capabilities. Again we were kindly donated this board for testing and once again TweakTown asks "Does this board deserve to be called ABIT"?

Click Here to Read Complete Review

Featured Local Company

Manage x Solutions

503 306 1683
3607 NE 78th
Portland, OR

Related Local Events
WOOD TECHNOLOGY CLINIC & SHOW 2010
Dates: 3/9/2010 - 3/11/2010
Location: Oregon Convention Center
Portland, OR
View Details

Party in the Pinot
Dates: 7/25/2009 - 7/25/2009
Location: Oswego Hills Winery
West Linn, OR
View Details