A Laser Technique Could Improve Electronics Raleigh NC

provided by: 

Vanderbiltâ_Ts powerful free-electron laser is able to selectively remove hydrogen atoms from the surface of silicon, which could lead to an improved chip-making process. Light from the laser was directed into the semi-conductor processing chamber (on the left), where the experiment took place. (Credit: Neil Brake/Vanderbilt University)

A new process using lasers instead of high temperatures to remove hydrogen from silicon during the chip-manufacturing process could lead to faster semiconductors, by replacing the current technique, which often causes damage to silicon that inhibits chip speed.

Today, semiconductors are manufactured by layering silicon on a wafer, one "sheet" at a time. During this process, oxygen, which is a byproduct, can collect between the silicon layers -- which ruins the chip. To prevent that from happening, hydrogen is added to the silicon as a protective coating. While it solves the oxygen issue, the step has its own, albeit lesser, drawback: before the next layer of silicon can be added, the hydrogen must be removed, in a process that currently requires heating the chip to around 800 degrees Celsius. This heating creates defects in the silicon that keep chips from performing at their optimal speeds.

This new laser process, which can target and selectively remove molecules without heating the silicon, could replace the heating step, says Norman Tolk, physics professor at Vanderbilt University, and one of the researchers on the project. "The more you heat [silicon], the more you put it in a hostile environment," he says. Ideally, the chip-making process should be done with temperatures that are as low as possible, he says.

In a hydrogen-silicon bond, the energy required to break the bond corresponds to infrared light with a wavelength of 4.8 micrometers. The researchers adjusted their extremely powerful laser (called a "free electron laser") to emit a beam at this wavelength, and bathed the silicon-hydrogen bonds with the light. The laser's energy caused the bonded atoms to bounce back and forth, as if on a spring, until the vibrations grew large enough to break the bonds.

By Kate Greene

Read article at techreview.com

Look N' Listen

Custom integrators of all home entertainment systems to simplify daily living and make it more enjoyable.

(919)274-1626
300 W. Morgan St
Raleigh, NC
www.looknlistenonline.com

Look n' Listen is based in Raleigh, North Carolina and specializes in the integration of home entertainment systems to simplify daily living and make life more convenient and enjoyable. Our systems integrators will guide you every step of the way in designing and installing a complete system for you.

We don't try to sell you a system or components you don't need. Our goal is your long-term satisfaction and we will work relentlessly to deliver a top quality system that exceeds your expectations and meets the demands of technology today and in the future.

We can design and will oversee your home entertainment process from beginning to end. Whether an entry-level audio system, state of the art home theater, full automation and control system installation, or structured wiring and networking needs we are here to help. We don't just install these systems as disparate, independent systems but integrate them seamlessly so you can experience the maximum pleasure, convenience, and functionality. At Look n' Listen we strive to ensure that all of your expectations for system design, operation, and performance are met.

If you are looking for the perfect home system look no further, contact us today!


– http://www.looknlistenonline.com
– http://www.looknlistenonline.com