Analog Devices' AD7190 delta-sigma converter Albany OR

A look at Analog Devices' AD7190 delta-sigma converter. The article offers a description of the products processing abilities.

Local Companies

Project Delivery Group, LLC
503-364-4004
3150 SE 22nd Street
Salem, OR
Designtek Llc
(541) 928-2307
Albany, OR
Pacwest Engineering
(541) 926-7634
1530 9th Ave SE
Albany, OR
Ltk Engineering Service
(503) 248-1790
101 SW Main St Ste 810
Portland, OR
American Council of Engineering Comapnies of Oregon
(503) 292-2348
5319 SW Westgate Dr Ste 221
Portland, OR
Radisphere
541-753-3033
5060 SW Philomath Blvd. #336
Corvallis, OR
Northwest Windshields
(541) 967-1211
Albany, OR
Hte Hightower Engineering
(541) 924-3834
1520 2nd Ave SE Apt 1
Albany, OR
Hainz Engineering Services Inc
(541) 967-0572
3842 Firwood Cir SE
Albany, OR
Concept Engineering
(503) 623-4627
414 SW Westwood Dr
Dallas, OR

provided by: EDN

Analog Devices' AD7190 delta-sigma converter includes the functions to make a complete precision-measurement front end. In addition to the 24-bit converter, the part features a PGA (programmable-gain amplifier) configurable for gains of one to 128. The device also has an internal multiplexer to provide for two differential-measurement sources or four pseudodifferential sources. It incorporates an internal clock source, a temperature sensor, and a bridge-power-down circuit to allow power savings by deactivating the bridge that the part is measuring. The high-precision converter, which can detect an open-sensor condition, suits use in strain gauges, scales, process measurement, control modules, scientific instrumentation and chromatography instruments, and other high-resolution data-acquisition tasks.

Operating with 3 to 5.25V of power, the AD7190 consumes 6 mA of current; rms noise is 7 nV at a gain of 128. The offset drift is 5 nV/°C, and gain drift is 2 ppm/°C.

The device produces noise-free, 21-bit measurements at 4.7 Hz and 16.5-bit, noise-free measurements at 2.4 kHz, and it performs simultaneous 50- and 60-Hz rejection on an incoming signal. The ADC interfaces to the digital system using an SPI (serial-peripheral interface) or Microwire-compatible interface. You can select a no-latency mode to reduce software overhead if you need a valid conversion per output data. The device also has four general-purpose digital outputs, although two of these outputs also serve as alternative external-reference inputs.

The AD7190 is available in a 24-pin TSSOP for a suggested retail price of $5.90 (1000). It operates over a -40 to +105°C temperature range. Samples are available now, and production quantities will be available in November. An evaluation kit interfaces to a PC with a USB.

Analog Devices, www.analog.com.



author: by Paul Rako

EDN. Copyright © 2008 Reed Business Information, a division of Reed Elsevier Inc. All rights reserved.

Featured Local Company

Radisphere

541-753-3033
5060 SW Philomath Blvd. #336
Corvallis, OR