Analog Devices' AD7190 delta-sigma converter Buffalo NY

A look at Analog Devices' AD7190 delta-sigma converter. The article offers a description of the products processing abilities.

Local Companies

LiRo Engineers, Inc.
(716) 882-5476
690 Delaware Ave.
Buffalo, NY
B & L Wholesale Supply, Inc.
(716) 853-2600
1 Bud Mil Dr.
Buffalo, NY
Bevlar & Associates, Inc.
(716) 446-5544
2495 Main St., Ste. 310
Buffalo, NY
RGW Ltd
(716) 832-8023
150 Linden Ave.
Buffalo, NY
IBC Engineering, P.C.
(716) 836-2315
2495 Main St., Ste. 318
Buffalo, NY
DiDonato Associates
(716) 656-1900
689 Main St.
Buffalo, NY
C & S Engineers, Inc.
(716) 847-1630
90 Broadway
Buffalo, NY
GZA GeoEnvironmental of NY
(716) 685-2300
535 Washington St., 11th Fl.
Buffalo, NY
Jansen-Kiener Consulting Engineers, P.C.
(716) 854-3508
429 Franklin St., Ste. 200
Buffalo, NY
Bergmann Associates
(716) 852-3211
40 La Riviere Dr., Ste. 150
Buffalo, NY

provided by: EDN

Analog Devices' AD7190 delta-sigma converter includes the functions to make a complete precision-measurement front end. In addition to the 24-bit converter, the part features a PGA (programmable-gain amplifier) configurable for gains of one to 128. The device also has an internal multiplexer to provide for two differential-measurement sources or four pseudodifferential sources. It incorporates an internal clock source, a temperature sensor, and a bridge-power-down circuit to allow power savings by deactivating the bridge that the part is measuring. The high-precision converter, which can detect an open-sensor condition, suits use in strain gauges, scales, process measurement, control modules, scientific instrumentation and chromatography instruments, and other high-resolution data-acquisition tasks.

Operating with 3 to 5.25V of power, the AD7190 consumes 6 mA of current; rms noise is 7 nV at a gain of 128. The offset drift is 5 nV/°C, and gain drift is 2 ppm/°C.

The device produces noise-free, 21-bit measurements at 4.7 Hz and 16.5-bit, noise-free measurements at 2.4 kHz, and it performs simultaneous 50- and 60-Hz rejection on an incoming signal. The ADC interfaces to the digital system using an SPI (serial-peripheral interface) or Microwire-compatible interface. You can select a no-latency mode to reduce software overhead if you need a valid conversion per output data. The device also has four general-purpose digital outputs, although two of these outputs also serve as alternative external-reference inputs.

The AD7190 is available in a 24-pin TSSOP for a suggested retail price of $5.90 (1000). It operates over a -40 to +105°C temperature range. Samples are available now, and production quantities will be available in November. An evaluation kit interfaces to a PC with a USB.

Analog Devices, www.analog.com.



author: by Paul Rako

EDN. Copyright © 2008 Reed Business Information, a division of Reed Elsevier Inc. All rights reserved.

Featured Local Company

LiRo Engineers, Inc.

(716) 882-5476
690 Delaware Ave.
Buffalo, NY