Analog Devices' AD7190 delta-sigma converter Charlotte NC

A look at Analog Devices' AD7190 delta-sigma converter. The article offers a description of the products processing abilities.

Local Companies

Bulla Smith Design Engineering
(704) 333-3122
1347 Harding Place
Charlotte, NC
CDM
(704) 342-4546
301 South McDowell Street
Charlotte, NC
Duncan-Parnell, Inc
(704) 372-7766
900 South McDowell Street
Charlotte, NC
Haas & Kennedy Engineers, P.A.
(704) 377-8800
PO Box 37291
Charlotte, NC
Arcadis
(704) 752-4258
First Citizens Plaza
Charlotte, NC
ColeJenest & Stone, P.A
(704) 376-1555
200 South Tryon Street
Charlotte, NC
Shaw Energy Delivery Services
(704) 331-6205
128 South Tryon Street
Charlotte, NC
Stewart Engineering, Inc.
(704) 334-7925
200 South College Street
Charlotte, NC
The Shaw Group, Inc.
(704) 331-6460
128 South Tryon Street
Charlotte, NC
The Summit Companies
(704) 504-1717
P.O. Box 7384
Charlotte, NC

provided by: EDN

Analog Devices' AD7190 delta-sigma converter includes the functions to make a complete precision-measurement front end. In addition to the 24-bit converter, the part features a PGA (programmable-gain amplifier) configurable for gains of one to 128. The device also has an internal multiplexer to provide for two differential-measurement sources or four pseudodifferential sources. It incorporates an internal clock source, a temperature sensor, and a bridge-power-down circuit to allow power savings by deactivating the bridge that the part is measuring. The high-precision converter, which can detect an open-sensor condition, suits use in strain gauges, scales, process measurement, control modules, scientific instrumentation and chromatography instruments, and other high-resolution data-acquisition tasks.

Operating with 3 to 5.25V of power, the AD7190 consumes 6 mA of current; rms noise is 7 nV at a gain of 128. The offset drift is 5 nV/°C, and gain drift is 2 ppm/°C.

The device produces noise-free, 21-bit measurements at 4.7 Hz and 16.5-bit, noise-free measurements at 2.4 kHz, and it performs simultaneous 50- and 60-Hz rejection on an incoming signal. The ADC interfaces to the digital system using an SPI (serial-peripheral interface) or Microwire-compatible interface. You can select a no-latency mode to reduce software overhead if you need a valid conversion per output data. The device also has four general-purpose digital outputs, although two of these outputs also serve as alternative external-reference inputs.

The AD7190 is available in a 24-pin TSSOP for a suggested retail price of $5.90 (1000). It operates over a -40 to +105°C temperature range. Samples are available now, and production quantities will be available in November. An evaluation kit interfaces to a PC with a USB.

Analog Devices, www.analog.com.



author: by Paul Rako

EDN. Copyright © 2008 Reed Business Information, a division of Reed Elsevier Inc. All rights reserved.

Featured Local Company

Bulla Smith Design Engineering

(704) 333-3122
1347 Harding Place
Charlotte, NC

Related Local Events
Plant Engineering South
Dates: 4/28/2010 - 4/29/2010
Location: Charlotte Convention Center
Charlotte, NC
View Details

Fall Home Show-Charlotte
Dates: 10/9/2009 - 10/11/2009
Location: Metrolina Expo Trade Center, Charlotte
Charlotte, NC
View Details

SOUTH-TEC CHARLOTTE
Dates: 10/6/2009 - 10/8/2009
Location: Charlotte Convention Center
Charlotte, NC
View Details

21st Century Building Expo & Conference
Dates: 9/16/2009 - 9/18/2009
Location: Charlotte Convention Center
Charlotte, NC
View Details

21st Century Building Expo & Conference
Dates: 9/16/2009 - 9/18/2009
Location: Charlotte Convention Center, Charlotte
Charlotte, NC
View Details