Analog Devices' AD7190 delta-sigma converter Columbus OH

A look at Analog Devices' AD7190 delta-sigma converter. The article offers a description of the products processing abilities.

Local Companies

McCormick Taylor Inc
(614) 436-1700
445 Hutchinson Ave
Columbus, OH
Korda Nemeth Engineering
(614) 487-1650
1650 Watermark Dr
Columbus, OH
Advanced Computational Engineering Services
(614) 861-7015
750 Cross Pointe Rd
Columbus, OH
Paul J Ford & Co
(614) 221-6679
250 E Broad St
Columbus, OH
Integral Solutions
(614) 888-4684
8108 N High St
Columbus, OH
Gedeon Frederick & Co
(440) 892-0490
26031 Center Ridge Rd
Westlake, OH
Woolpert Llp
(740) 354-8885
Portsmouth, OH
Weston Solution Inc
(937) 384-4200
2566 Kohnle Dr
Miamisburg, OH
International Engineered Products
(513) 793-0393
10999 Reed Hartman Hwy Ste 200
Cincinnati, OH
Automation Software & Engineering
(440) 543-7923
17820 Northwood Lakes Dr
Chagrin Falls, OH

provided by: EDN

Analog Devices' AD7190 delta-sigma converter includes the functions to make a complete precision-measurement front end. In addition to the 24-bit converter, the part features a PGA (programmable-gain amplifier) configurable for gains of one to 128. The device also has an internal multiplexer to provide for two differential-measurement sources or four pseudodifferential sources. It incorporates an internal clock source, a temperature sensor, and a bridge-power-down circuit to allow power savings by deactivating the bridge that the part is measuring. The high-precision converter, which can detect an open-sensor condition, suits use in strain gauges, scales, process measurement, control modules, scientific instrumentation and chromatography instruments, and other high-resolution data-acquisition tasks.

Operating with 3 to 5.25V of power, the AD7190 consumes 6 mA of current; rms noise is 7 nV at a gain of 128. The offset drift is 5 nV/°C, and gain drift is 2 ppm/°C.

The device produces noise-free, 21-bit measurements at 4.7 Hz and 16.5-bit, noise-free measurements at 2.4 kHz, and it performs simultaneous 50- and 60-Hz rejection on an incoming signal. The ADC interfaces to the digital system using an SPI (serial-peripheral interface) or Microwire-compatible interface. You can select a no-latency mode to reduce software overhead if you need a valid conversion per output data. The device also has four general-purpose digital outputs, although two of these outputs also serve as alternative external-reference inputs.

The AD7190 is available in a 24-pin TSSOP for a suggested retail price of $5.90 (1000). It operates over a -40 to +105°C temperature range. Samples are available now, and production quantities will be available in November. An evaluation kit interfaces to a PC with a USB.

Analog Devices, www.analog.com.



author: by Paul Rako

EDN. Copyright © 2008 Reed Business Information, a division of Reed Elsevier Inc. All rights reserved.

Featured Local Company

OakTec, Inc.

Design and manufacture of custom and standard electronic machine controls for original equipment manufactures (OEM).

937-432-6683
755 Congress Park Drive
Dayton, OH
www.oaktecinc.com

Design and manufacture of custom and standard electronic machine controls for original equipment manufactures (OEM) applications. Process control instrumentation, digital panel meters, transducers and transmitters, for measuring volt, amp, power, temperature, frequency and counting applications.

www.oaktecinc.com
www.oaktecinc.com