Analog Devices' AD7190 delta-sigma converter Greensboro NC

A look at Analog Devices' AD7190 delta-sigma converter. The article offers a description of the products processing abilities.

Local Companies

Adamson Engineering Consultants
(336) 856-1887
7325 W Friendly Ave
Greensboro, NC
MacTec Engineering & Consulting Inc
(336) 294-4221
7347 W Friendly Ave Ste E
Greensboro, NC
Anderson & Associates Inc
(336) 299-7184
8204 W Market St
Greensboro, NC
Creed Hugh Associates Inc
(336) 275-9826
Greensboro, NC
Joyce Engineering Inc
(336) 323-0092
2301 W Meadowview Rd
Greensboro, NC
Blackburn Engineering
(336) 834-9599
2707 Cromwell Rd
Greensboro, NC
Martin Engineering
(336) 852-1291
4928 Tower Rd Unit B
Greensboro, NC
Smith Ben L Jr
(336) 275-6626
1300 Westover Ter
Greensboro, NC
Charles Engineering
(336) 854-8199
903 New Garden Rd
Greensboro, NC
L P A Group Inc the
(336) 393-0441
7031 Albert Pick Rd
Greensboro, NC

provided by: EDN

Analog Devices' AD7190 delta-sigma converter includes the functions to make a complete precision-measurement front end. In addition to the 24-bit converter, the part features a PGA (programmable-gain amplifier) configurable for gains of one to 128. The device also has an internal multiplexer to provide for two differential-measurement sources or four pseudodifferential sources. It incorporates an internal clock source, a temperature sensor, and a bridge-power-down circuit to allow power savings by deactivating the bridge that the part is measuring. The high-precision converter, which can detect an open-sensor condition, suits use in strain gauges, scales, process measurement, control modules, scientific instrumentation and chromatography instruments, and other high-resolution data-acquisition tasks.

Operating with 3 to 5.25V of power, the AD7190 consumes 6 mA of current; rms noise is 7 nV at a gain of 128. The offset drift is 5 nV/°C, and gain drift is 2 ppm/°C.

The device produces noise-free, 21-bit measurements at 4.7 Hz and 16.5-bit, noise-free measurements at 2.4 kHz, and it performs simultaneous 50- and 60-Hz rejection on an incoming signal. The ADC interfaces to the digital system using an SPI (serial-peripheral interface) or Microwire-compatible interface. You can select a no-latency mode to reduce software overhead if you need a valid conversion per output data. The device also has four general-purpose digital outputs, although two of these outputs also serve as alternative external-reference inputs.

The AD7190 is available in a 24-pin TSSOP for a suggested retail price of $5.90 (1000). It operates over a -40 to +105°C temperature range. Samples are available now, and production quantities will be available in November. An evaluation kit interfaces to a PC with a USB.

Analog Devices, www.analog.com.



author: by Paul Rako

EDN. Copyright © 2008 Reed Business Information, a division of Reed Elsevier Inc. All rights reserved.

Featured Local Company

Salisbury Engineering & Planning

(704) 633-8550
516-A N. Main St.
Salisbury, NC