Analog Devices' AD7190 delta-sigma converter Honolulu HI

A look at Analog Devices' AD7190 delta-sigma converter. The article offers a description of the products processing abilities.

Local Companies

In+Form Design, Inc.
(808) 524-4711
P.O. Box 37400
Honolulu, HI
eco Power Systems / Electric Vehicle Technologies
808-484-2800
99-1374 Koaha Pl.
Aiea, HI
Shah & Associates
(808) 942-7878
425 Ena Rd
Honolulu, HI
Ema Inc
(808) 946-9578
1357 Kapiolani Blvd
Honolulu, HI
URS Corporation
(808) 593-1116
615 Piikoi St Ste 900
Honolulu, HI
Consulting Structural Hawaii Inc
(808) 945-0198
931 Hausten St Ste 200
Honolulu, HI
Brown and Caldwell Consultants
(808) 523-8499
119 Merchant St Ste 200
Honolulu, HI
Ch2M Hill
(808) 943-1133
1585 Kapiolani Blvd
Honolulu, HI
Katayama & Associates Inc
(808) 521-5086
660 Ala Moana Blvd Ste 204
Honolulu, HI
Manthos Engineering
(808) 531-7374
Honolulu, HI

provided by: EDN

Analog Devices' AD7190 delta-sigma converter includes the functions to make a complete precision-measurement front end. In addition to the 24-bit converter, the part features a PGA (programmable-gain amplifier) configurable for gains of one to 128. The device also has an internal multiplexer to provide for two differential-measurement sources or four pseudodifferential sources. It incorporates an internal clock source, a temperature sensor, and a bridge-power-down circuit to allow power savings by deactivating the bridge that the part is measuring. The high-precision converter, which can detect an open-sensor condition, suits use in strain gauges, scales, process measurement, control modules, scientific instrumentation and chromatography instruments, and other high-resolution data-acquisition tasks.

Operating with 3 to 5.25V of power, the AD7190 consumes 6 mA of current; rms noise is 7 nV at a gain of 128. The offset drift is 5 nV/°C, and gain drift is 2 ppm/°C.

The device produces noise-free, 21-bit measurements at 4.7 Hz and 16.5-bit, noise-free measurements at 2.4 kHz, and it performs simultaneous 50- and 60-Hz rejection on an incoming signal. The ADC interfaces to the digital system using an SPI (serial-peripheral interface) or Microwire-compatible interface. You can select a no-latency mode to reduce software overhead if you need a valid conversion per output data. The device also has four general-purpose digital outputs, although two of these outputs also serve as alternative external-reference inputs.

The AD7190 is available in a 24-pin TSSOP for a suggested retail price of $5.90 (1000). It operates over a -40 to +105°C temperature range. Samples are available now, and production quantities will be available in November. An evaluation kit interfaces to a PC with a USB.

Analog Devices, www.analog.com.



author: by Paul Rako

EDN. Copyright © 2008 Reed Business Information, a division of Reed Elsevier Inc. All rights reserved.

Featured Local Company

In+Form Design, Inc.

(808) 524-4711
P.O. Box 37400
Honolulu, HI
www.ifdesigninc.com