Analog Devices' AD7190 delta-sigma converter Wichita KS

A look at Analog Devices' AD7190 delta-sigma converter. The article offers a description of the products processing abilities.

Local Companies

Foster Design, Inc.
316-832-9700
1938 N. Woodlawn, Suite 450
Wichita, KS
Sevart J B PE
(316) 262-6834
1762 N Saint Francis St
Wichita, KS
Jabara Engineering Consultants
(316) 687-3993
5920 E Central Ave Ste 103
Wichita, KS
Boling Engineering Consultants Inc
(316) 262-5706
535 S Emporia St Ste 101
Wichita, KS
Wichita State University
(316) 978-3676
8441 E 32nd St N
Wichita, KS
Mid-Kansas Engineering & Consultants
(316) 264-6700
1525 N Barwise St # 5
Wichita, KS
J B Dwerlkotte Associates Inc
(316) 269-6970
429 N Saint Francis St
Wichita, KS
Kennedy William K Engnr
(316) 264-3001
233 S Lulu St
Wichita, KS
Stefan Voegeli & Associates
(316) 264-3061
349 S Hydraulic St
Wichita, KS
Innovative Design
(316) 239-7999
535 S Emporia St Ste 105
Wichita, KS

provided by: EDN

Analog Devices' AD7190 delta-sigma converter includes the functions to make a complete precision-measurement front end. In addition to the 24-bit converter, the part features a PGA (programmable-gain amplifier) configurable for gains of one to 128. The device also has an internal multiplexer to provide for two differential-measurement sources or four pseudodifferential sources. It incorporates an internal clock source, a temperature sensor, and a bridge-power-down circuit to allow power savings by deactivating the bridge that the part is measuring. The high-precision converter, which can detect an open-sensor condition, suits use in strain gauges, scales, process measurement, control modules, scientific instrumentation and chromatography instruments, and other high-resolution data-acquisition tasks.

Operating with 3 to 5.25V of power, the AD7190 consumes 6 mA of current; rms noise is 7 nV at a gain of 128. The offset drift is 5 nV/°C, and gain drift is 2 ppm/°C.

The device produces noise-free, 21-bit measurements at 4.7 Hz and 16.5-bit, noise-free measurements at 2.4 kHz, and it performs simultaneous 50- and 60-Hz rejection on an incoming signal. The ADC interfaces to the digital system using an SPI (serial-peripheral interface) or Microwire-compatible interface. You can select a no-latency mode to reduce software overhead if you need a valid conversion per output data. The device also has four general-purpose digital outputs, although two of these outputs also serve as alternative external-reference inputs.

The AD7190 is available in a 24-pin TSSOP for a suggested retail price of $5.90 (1000). It operates over a -40 to +105°C temperature range. Samples are available now, and production quantities will be available in November. An evaluation kit interfaces to a PC with a USB.

Analog Devices, www.analog.com.



author: by Paul Rako

EDN. Copyright © 2008 Reed Business Information, a division of Reed Elsevier Inc. All rights reserved.

Featured Local Company

Foster Design, Inc.

316-832-9700
1938 N. Woodlawn, Suite 450
Wichita, KS