Analog Devices' new AD7626 San Jose CA

provided by: EDN

Analog Devices' new AD7626 ADC provides 16-bit samples at a 10-MHz rate while using 130 mW. The part targets use in digital-X-ray machines, MRI (magnetic-resonance-imaging) systems, and ATE (automatic-test equipment), as well as general data-acquisition, sonar, and other applications. The differential-input device uses digital-LVDS (low-voltage-differential-signaling) outputs and has an internal 4.096V buffered reference, or you can provide an external reference. A common-mode pin can supply half the reference voltage to the input amplifiers. The device requires both 2.5 and 5V power supplies.

The AD7626 has good dc performance, with a typical INL (integral nonlinearity) of ±1 bit, as well as no missing codes over its output range. Typical DNL (differential nonlinearity) is ±0.3 bits. The device also offers good ac specs with a 92-dB SNR (signal-to-noise ratio) and an ENOB (effective number of bits) of 15. The part employs a SAR (successive-approximation-register) architecture so that, unlike a pipelined ADC, each clock cycle immediately produces a valid output. Pipelined converters must clock four to six times for the correct conversion data to work its way through the pipeline and appear at the output. This limitation makes pipelined converters less appropriate in multiplexed-system applications, in which the clock-cycle latency creates more software overhead to ensure that the data is valid for a given channel.

The AD7626 is available in a 5×5-mm, 32-pin LFCSP with a suggested retail price of $34 (1000). It operates over a -40 to +85°C temperature range. Production quantities and evaluation modules are available now.

Analog Devices, www.analog.com.

author: by Paul Rako

EDN. Copyright © 2008 Reed Business Information, a division of Reed Elsevier Inc. All rights reserved.

Renewable Power Solutions Inc

Solar and wind power design, Engineering, acquisition and installations

408-998-7400
2029 O' Toole Ave
San Jose, CA
www.rps-solar.com

Renewable Power Solutions, Inc.is based in San Jose CA, we provide the best solar electric solution for the future.

Experience.

We have 10+ years of experience in the alternative energy industry using current technologies and state of the art techniques to ensure the best possible solar electric system to meet the needs of our customers.

Our Commitment to You

Power Solutions' commitment to the public is to design and install the solar electric system that best suits your family or business needs. By using our 10 years of experience in the alternative energy industry, current technologies and state of the art techniques we will ensure the best possible solar electric system for you.

Our Principals

We only represent manufacturers that have proven to have excellent customer service, the most reliable products and the least environmental impact during manufacturing. Our 100% customer satisfaction rating is our most important certification. We will not sacrifice it by representing manufacturers that do not share our high standards for sustainability and customer satisfaction.

Our Solution

We would like for everyone to be energy independent and that includes you. Our solution will be presented to you in simple fashion; our engineering team is not allowed to do proposals. We warranty the simplicity of our proposal to make sense environmentally and economically. Your next door neighbors solutions is not necessary the right solution for you. We provide you with one on one attention from the initial visit to the last one.