Avoiding Electrical Hazards on Construction Sites Buffalo NY

The most common electrical hazard on today's construction sites is from ground fault electrical shock. In order to reduce shock-related injuries, the OSHA electrical standard requires employers to provide either ground fault circuit interrupters (GFCIs) for receptacle outlets or an assured equipment grounding conductor program. Here are some guidelines to prevent electrical injuries.

Local Companies

DeSpirt Mosaic & Marble Co., Inc
(716) 892-5294
1085 East Delavan Ave.
Buffalo, NY
Buffalo Metal Forming, Inc.
(716) 856-4575
103 Sycamore St.
Buffalo, NY
Eberl Iron Works, Inc.
(716) 854-7633
128 Sycamore St.
Buffalo, NY
T & D Ceramics
(716) 894-9209
2133 Broadway
Cheektowaga, NY
Maks Contracting
(716) 912-8924
3898 Broadway
Cheektowaga, NY
Case Handyman & Remodeling
716-839-6020
4511 Harlem Road
Amherst, NY
Kithchen and Bath Enhancements
913 3421
41 Dyke Rd.
West Seneca, NY
Raymond E. Kelley, Inc.
(716) 684-3550
33 Main St.
Bowmansville, NY
ArcelorMittal - Lackawanna
(716) 821-2212
3175 Lakeshore Rd.
Blasdell, NY
Empire Machine Tool Services
(716) 208-0040
PO Box 2481
Blasdell, NY


The most common electrical hazard on today's construction sites is from ground fault electrical shock. In order to reduce shock-related injuries, the OSHA electrical standard requires employers to provide either ground fault circuit interrupters (GFCIs) for receptacle outlets or an assured equipment grounding conductor program. Here are some guidelines to prevent electrical injuries.

  • Always use appropriate personal protective equipment, including but not limited to rubber insulating gloves, hoods, sleeves, matting, and blankets.
  • Only use hand tools, electrical tools, and extension cords that are in good repair.
  • De-energize electric power circuits before working near, inspecting, or making repairs.
  • Provide grounding. Service or system ground where the neutral conductor is grounded. Equipment grounding provides a path for current from a tool or machine to the ground. Any live parts of electrical equipment operating 50 volts or more must be guarded to avoid accidental contact.
  • When employees using jackhammers or hand tools do not know the exact location of underground electrical lines, they must wear insulated gloves.
  • De-energize and ground overhead lines before beginning work. Unqualified employees and mechanical equipment must stay at least 10 feet away from these lines.
  • These guidelines are an excerpt from the Tailgate/Toolbox Safety Meetings created by Safety Services in Corona, Calif., a company that provides customized safety training and support for small cons

    Click here to read full article from Remodeling

    Featured Local Company

    DeSpirt Mosaic & Marble Co., Inc

    (716) 892-5294
    1085 East Delavan Ave.
    Buffalo, NY