Avoiding Electrical Hazards on Construction Sites Minneapolis MN

The most common electrical hazard on today's construction sites is from ground fault electrical shock. In order to reduce shock-related injuries, the OSHA electrical standard requires employers to provide either ground fault circuit interrupters (GFCIs) for receptacle outlets or an assured equipment grounding conductor program. Here are some guidelines to prevent electrical injuries.

Local Companies

Kraus-Anderson Capital, Inc
(612) 305-2934
523 South Eighth St
Minneapolis, MN
RCP Fine Finish, Inc.
(763) 545-9447
6122 Olson Memorial Hwy.
Golden Valley, MN
Aero Construction Co. Inc.
612-408-0222
2129 Brunswick Av. N.
Mpls, MN
Rich Construction, LLC
(612) 331-2113
212 Second St. S.E., Ste. 220
Minneapolis, MN
Castle Home Services, Inc
(612) 789-1011
3323 Arthur St. N.E.
Minneapolis, MN
BROWN BROTHERS REMODELING LLC
651-330-2106
3101 OLD HWY 8 STE 300
ROSEVILLE, MN
Great Lakes Waterproofing
651-340-2901
Selby Avenue
St Paul, MN
DTM Remodeling Design Build, INC.
651-699-7654
1272 Grand Ave.
St. Paul, MN
DTM Remodeling Design Build, INC.
651-699-7654
1272 Grand Ave.
St. Paul, MN
Weis Builders, Inc.
(612) 243-5000
7645 Lyndale Ave. S.
Minneapolis, MN


The most common electrical hazard on today's construction sites is from ground fault electrical shock. In order to reduce shock-related injuries, the OSHA electrical standard requires employers to provide either ground fault circuit interrupters (GFCIs) for receptacle outlets or an assured equipment grounding conductor program. Here are some guidelines to prevent electrical injuries.

  • Always use appropriate personal protective equipment, including but not limited to rubber insulating gloves, hoods, sleeves, matting, and blankets.
  • Only use hand tools, electrical tools, and extension cords that are in good repair.
  • De-energize electric power circuits before working near, inspecting, or making repairs.
  • Provide grounding. Service or system ground where the neutral conductor is grounded. Equipment grounding provides a path for current from a tool or machine to the ground. Any live parts of electrical equipment operating 50 volts or more must be guarded to avoid accidental contact.
  • When employees using jackhammers or hand tools do not know the exact location of underground electrical lines, they must wear insulated gloves.
  • De-energize and ground overhead lines before beginning work. Unqualified employees and mechanical equipment must stay at least 10 feet away from these lines.
  • These guidelines are an excerpt from the Tailgate/Toolbox Safety Meetings created by Safety Services in Corona, Calif., a company that provides customized safety training and support for small cons

    Click here to read full article from Remodeling

    Featured Local Company

    Kraus-Anderson Capital, Inc

    6123052934
    523 South Eighth St
    Minneapolis, MN

    Related Local Events
    Commercial Construction Show
    Dates: 6/8/2010 - 6/10/2010
    Location: Minneapolis Convention Center
    Minneapolis, MN
    View Details

    Home Improvement & Design Expo-Minneapolis
    Dates: 10/17/2009 - 10/18/2009
    Location: Minneapolis Convention Center, Minneapolis
    Minneapolis, MN
    View Details