Avoiding Electrical Hazards on Construction Sites Saint Louis MO

The most common electrical hazard on today's construction sites is from ground fault electrical shock. In order to reduce shock-related injuries, the OSHA electrical standard requires employers to provide either ground fault circuit interrupters (GFCIs) for receptacle outlets or an assured equipment grounding conductor program. Here are some guidelines to prevent electrical injuries.

Local Companies

Saint Louis Group Design/Build, Inc.
(314)865-4422
P.O. Box 16522
St. Louis, MO
Kelly Marston Tile & Stone
618-520-0917
214 East Church
Collinsville, IL
Nanna Construction
(314) 428-5422
Saint Louis, MO
Schei Construction Co Inc
(314) 845-0091
36 Cliff Dr
Saint Louis, MO
Hern Home Improvement
(314) 638-5690
247 Runyon Ave
Saint Louis, MO
Leave It To Weaver
(314) 353-3353
3470 Hampton Ave
Saint Louis, MO
Aleto Construction Co Inc
(314) 892-9922
4421 Roadside Ln
Saint Louis, MO
Moore Patrick Construction Co Inc
(314) 535-5000
4169 Laclede Ave
Saint Louis, MO
Reconstruction Inc
(314) 962-8500
656 Marshall Ave
Saint Louis, MO
Saint Louis Group Design Build Inc
(314) 865-4422
PO Box 16522
Saint Louis, MO


The most common electrical hazard on today's construction sites is from ground fault electrical shock. In order to reduce shock-related injuries, the OSHA electrical standard requires employers to provide either ground fault circuit interrupters (GFCIs) for receptacle outlets or an assured equipment grounding conductor program. Here are some guidelines to prevent electrical injuries.

  • Always use appropriate personal protective equipment, including but not limited to rubber insulating gloves, hoods, sleeves, matting, and blankets.
  • Only use hand tools, electrical tools, and extension cords that are in good repair.
  • De-energize electric power circuits before working near, inspecting, or making repairs.
  • Provide grounding. Service or system ground where the neutral conductor is grounded. Equipment grounding provides a path for current from a tool or machine to the ground. Any live parts of electrical equipment operating 50 volts or more must be guarded to avoid accidental contact.
  • When employees using jackhammers or hand tools do not know the exact location of underground electrical lines, they must wear insulated gloves.
  • De-energize and ground overhead lines before beginning work. Unqualified employees and mechanical equipment must stay at least 10 feet away from these lines.
  • These guidelines are an excerpt from the Tailgate/Toolbox Safety Meetings created by Safety Services in Corona, Calif., a company that provides customized safety training and support for small cons

    Click here to read full article from Remodeling

    Featured Local Company

    Saint Louis Group Design/Build, Inc.

    (314)865-4422
    P.O. Box 16522
    St. Louis, MO
    www.saintlouisgroupdesignbuild.com

    Related Local Events
    Builders Home & Remodeling Show
    Dates: 10/9/2009 - 10/11/2009
    Location: St. Charles Convention Center
    St Charles, MO
    View Details

    ASTM Committee Meetings
    Dates: 6/6/2009 - 6/11/2009
    Location:
    St, Louis, MO
    View Details