Brick and Brick Wall Cleaning Washington DC

Brick cleaning is the course of cleaning brick walls or bricks. Many options, each with its own advantages or disadvantages, exist. One can hire professionals or simply get the required tools and clean their own bricks or brick walls. One simply needs to decide on the best cleaning choices like power washing and sandblasting. Power washing involves a machine putting pressure with water into a high-pressure beam and hence removing deposits and dirt from the brick wall. To get power washing machines for cleaning brick walls, one can either rent them or lease them on agreement. Sandblasters on the other hand, make use of sand during the cleaning process. Sand is hit on the brick wall with immense power therefore cleaning the wall. These two methods can be used to clean many types of brick walls. However, one should be sure that there is no protective layer on the wall before cleaning. If there is, then one should simply use water and soap.

Get Quotes From Local Masons - Call 866-601-4451

It is important to keep bricks and brick walls clean and well maintained to make them long lasting. There are many kinds of brick cleaning systems and ways of prolonging the life of bricks. Information regarding brick cleaning is obtainable from books and articles available over the internet providing adequate information on how to care for bricks and walls correctly. There are different kinds of bricks and each call for a unique method of cleaning. When doing general house cleaning, it is important to know the kind of bricks your house is made of and the proper technique of brick wall cleaning.

Get Quotes From Local Masons - Call 866-601-4451

Textured red bricks are red through their entire body and are cleaned using the brush and bucket method. They can also be cleaned using the high water pressure method or the sandblasting technique. Red heavy sand-finished bricks are red throughout their entire body but additionally, they have different applied heavy sand finish faces. These kinds of bricks are commonly cleaned using the bucket and brush method. Alternatively, use the evenly applied high-pressure water system with plain water. Sandblast cleaning should not be used when cleaning Red heavy sand-finished bricks. If mortar stains are extreme, use commercial cleaning compounds to remove the stains.

White, Buff, Gray and Chocolate bricks are a common building block for many buildings. They are sand finished and are textured with different colors through the body other than red. These bricks are cleaned using the common brush and bucket method but alternatively, high-pressure water system applied lightly can be used. Sandblast cleaning can also be used except when a heavy sand finishing is involved. When cleaning using the brush and bucket and high-pressure water systems, do not use muriatic acid or muriatic acid compounds, plain water is convenient. Additionally, use Sure Klean Vanatrol and Diedrich 202 Vana-Stop.

Get Quotes From Local Masons - Call 866-601-4451

Pump It Up, The Inflatable Party Zone, Lanham-Bowie Maryland

301-577-7952
4230 Forbes Blvd Suite H
Lanham, MD