CCNA, CCENT, CCNP Test' Tips Cincinnati OH

This article lists some questions on static routing, the OSI model, IP version 6, and other topics to make you victory in CCNA, CCENT, and CCNP certification exam.

Local Companies

Cincinnati Jobs Corps Center
(513) 651-2000
1409 Western Avenue
Cincinnati, OH
Promark Company
513-768-6500
625 Eden Park Dr
Cincinnati, OH
Job Search Focus Group
513-871-0320
1345 Grace Ave
Cincinnati, OH
Rankin Vocational Services Center
513-531-3800
7162 Reading Rd
Cincinnati, OH
Growthways
513-661-4500
3515 Glenmore Ave
Cincinnati, OH
Great Oaks Institute of Technology & Career Development
(513) 771-8840
3254 East Kemper Road
Cincinnati, OH
Caston & Associates
513-985-9151
10999 Reed Hartman Hwy
Cincinnati, OH
EQ Coaching Solutions
513-312-7856
4030 Mt. Carmel Tobasco Rd
Cincinnati, OH
Kforce Healthcare Staffing
(513) 333-3500
10101 Alliance Rd Ste 340
Cincinnati, OH
Spherion Staffing
(513) 792-6658
5151 Pfeiffer Rd
Cincinnati, OH

 

Here are some questions on static routing, the OSI model, IP version 6, and other topics to help prepare you for CCNA, CCENT, and CCNP certification exam success! Network+ candidates, I didn’t leave you out!

CCNA Certification:

What character or combination of characters indicates a statically configured default route?

Answer: An "S*" next to a route indicates that it is a default static route. If there were no asterisk, the route type indicated would be a static route – but not a default static route.

CCENT Certification / Network+ Certification Question:

Which one of the following networking terms is not associated with the same OSI layer as the others?

A. router

B. packet

C. TCP

D. IP

Answer: C. TCP runs at the Transport layer of the OSI model. The other three terms are associated with the Network layer. The Network layer is sometimes referred to as the “routing layer”.

CCNP Certification / BSCI Exam:

If an IPv6 address begins with "FF", what kind of address is it?

A. broadcast

B. unicast

C. anycast

D. multicast

Answer: D. Any IPv6 address beginning with "FF" is a multicast. IPv6 does not use broadcasts.

CCNP Certification / BCMSN Exam:

You've configured an Etherchannel and note that the trunk has gone down. You check the interfaces on one switch and note that two are "err-disabled". The corresponding ports on the other switch are not. What should you do?

A. Nothing - that's the normal and desired behavior.

B. Shut and reopen the err-disabled interfaces.

C. Shut and reopen the non-err-disabled interfaces.

D. Use the err-abled command on the err-disabled interfaces.

Answer: B. After finishing the config, shut and reopen the err-disabled interfaces. If the configuration is correct, that will do the trick. This is common when you configure all of the ports on one switch and then start configuring the other switch, rather than going back and forth between the appropriate ports on the switches.

See you soon with more CCNA, Network+, CCNP, and CCENT questions!

About the Author:

Chris Bryant, CCIE #12933, is the owner of The Bryant Advantage (http://www.thebryantadvantage.com ), home of free CCNA and CCNP tutorials, and The Ultimate CCNA and CCNP Study Packages.

For free daily CCNA, CCNP, CCENT, Network+, Security+, and A+ questions, just visit the website and sign up for the daily newsletter!

Article Source: thePhantomWriters Article Submission Service

Featured Local Company

Cincinnati Jobs Corps Center

(513) 651-2000
1409 Western Avenue
Cincinnati, OH