Construction safety equipment Gardena CA

ILevel recommends using the new Wolmanized Parallam Parallel Strand Lumber (PSL) in unprotected exterior applications or where structural framing will be exposed to elevated moisture conditions. The construction on iLevel's PSL allows the copper azole preservative treatment developed by Arch Wood Protection to penetrate to the core of the product for protection from termites, mold and fungus and moisture. For free information, visit http://cb.ims.ca/5672-255.

Builders looking for the performance of an EIF system to meet stricter building codes for moisture protection can look to Sto's StoTherm Next system. It creates a continuous secondary air and moisture barrier to protect sheathing and other construction components. Unlike building paper or wraps that get easily damaged or torn during the construction process, StoGuard is seamless, tough and durable. .

Your carpenters are going to love this one. The GoPro Stair Bracket System makes creating stair runs a snap. Manufactured by GoPro Construction Solutions, the brackets have scale markings indicating the staircase rise and run on the product itself, so there's a smaller room for error. Thus, it is easy to properly attach the brackets to accommodate any pitches, rises and runs. .

Powers Fasteners' Wedge-Bolt+ is a heavy-duty anchor that can handle any wedge, sleeve or concrete screw anchoring application in virtually any base material. According to the company, the redesigned high-strength, vibration-resistant anchor is made of high boron alloy steel and is installed with a simple impact wrench. .

Using both Georgia-Pacific's DensArmor Plus with its own QuietRock soundproof drywall, Quiet Solution's new QuietRock DensArmor Plus 528 combines the top moisture, fire and mold resistance with excellent sound-abatement properties. The product is 5/8-inch thick and hangs, installs and finishes like regular drywall. .

Safety is no doubt an issue on your job sites. Making them a little safer on scaffolding is the new T-Brace, found at www.t-brace.com. A T-beam is created by inserting a 2 by 10 board horizontally in the top opening of the brace and a 2 by 6 board vertically in the bottom of the brace. This allows for longer spans between supports without reinforcement. For free information, visit http://cb.ims.ca/5672-260.

Premier Building Systems' latest Structural Insulated Panels (SIPs) are made from fast-growing renewable wood. The SIPs consist of a layer of expanded polystyrene (EPS) insulation sandwiched between two layers of OSB. The company claims the product maintains a 55 percent higher whole-wall efficiency over traditional 2-by-6, R-19 construction. For free information, visit http://cb.ims.ca/5672-261.

Made from fast-growing northern hardwoods and certified by the Sustainable Forestry Initiative, LP's SolidStart LSL is a new wood line made from compressed thin wood strands protected with both end- and edge-seals. The product offers a dimensional strength of 1.75E and, according to LP, outperforms dimensional lumber. .