Deck Stairs Birmingham AL

There are a number of different materials an individual will require in order to begin building deck stairs. When it comes to deck building, remodeling techniques, experts recommend gathering all of the materials beforehand. When all of the required materials are gathered prior to the remodeling endeavor, the builder will have everything that he or she needs readily accessible.

When building deck stairs a builder requires wooden dowels, galvanized nails, beams, deck screws, posts, deck planks, chalk line making material, a circular saw for cutting wood, and concrete mix to stabilize the deck stair posts. In addition to the latter list of necessary materials, a builder who is about to build deck stairs will also require a drill with accompanying drill bits, a square for framing, a jigsaw, an appropriate level, a tape for measuring, a miter saw, screwdrivers, a shovel, a reciprocating saw, and goggles for eye safety. In addition, the builder may want a pad of paper and a pen or pencil nearby to easily calculate and write down necessary measurements. Finally, a calculator may also prove handy when determining deck stair size and can save the builder a few minutes of time.

The above mentioned wooden dowels will need to be one and a half inches in length. The galvanized nails should be of the 16 penny variety. Beams purchased for deck building remodeling should be two feet by 12 feet, and the necessary posts must be 4 feet by 4 feet in size. Meanwhile, the deck planks needed for deck building remodeling should be 5/4 inch planks. The builder seeking to build deck stairs should make an appropriate list of all of the necessary materials, check off the materials and equipment one already has, and then head to the nearest local hardware store to pick up the remaining necessary materials before commencing on the deck stairs building project.

In order to commence on the deck rebuilding remodeling project and to appropriately add deck stairs, a builder needs to ensure that he or she calculates the size of the deck stairs being built correctly. That being said, the builder will need to determine what is referred to as the “rise and run” of the deck stairs being built. The first step for the builder is to take the measuring tape and determine in inches the distance between the earth and the deck.

Once the measurement is taken it should be immediately documented; this way the builder will not face recalculating measurements if he or she forgets. Now that the height, or run, of the stairs has been determined, the builder now needs to determine how many stairs are needed. The latter measurement should be divided by 7.5, which is the right stair height determined by building codes. Thus, dividing the measurement by 7.5 will give the builder the number of stairs required based on building code specification. If, during the division process the builder winds up with an uneven figure of a whole number with a remainder, the builder should round the number up to determine the number of stairs required.

Next, when it comes to building deck stairs, the builder will need to figure out the rise of the deck stairs. For instance, if the builder’s initial calculation of the measurement from the deck to the ground is 120 inches, it would first be divided by the building code specified stair height of 7.5 inches. The latter figure goes into 120 inches evenly and equates to 16; therefore the builder will be building 16 stairs in all. To figure out the rise, the builder would then take the figure of 120 inches and divide it by the total number of stairs he or she will be building, which equates to 7.5 inches.

When a builder has finished calculating the basic size of the deck stairs being built, it is necessary to prepare the area where the stairs will be placed. The area will need to be clean and ready to be worked. Further, when it comes to home improvements, it is always a good idea to prepare the area and the material beforehand; it makes the building process easier and things run smoothly when a builder is fully prepared for the task at hand.

PDF Building Contractors, llc

205-9873050
2231 Victory Lane, Suite 600
Hoover, AL
www.pdfbuilding.com