How to Distress Furniture Chapel Hill NC

Distressing furniture gives it an old look with rustic charm. It's something you can easily do as a weekend project at a fraction of the cost of buying it already distressed. Follow these steps to distress furniture.

Local Companies

Certapro Painters of Durham Chapell Hill
(919) 806-2244
4324 S Alston Ave
Durham, NC
Bennett Painting
(919) 493-8561
4618 Highgate DR
Durham, NC
Analysis Coating Systems
(919) 596-0722
410 Marly Dr
Durham, NC
Carrington Painting & Contracting
(919) 479-0249
1412 Old Oxford Rd
Durham, NC
Elite Painting
(919) 968-9560
PO Box 3612
Chapel Hill, NC
Morgan Marvin M
(919) 942-2180
714 Bradley Rd
Chapel Hill, NC
Morgan Paint Company Inc
(919) 942-2180
Chapel Hill, NC
Certapro
(919) 968-2558
Chapel Hill, NC
Max's Professional Painting & Gutter
(919) 942-1041
Chapel Hill, NC
Can Decorative Painting & Design
(919) 929-4511
607 Highland Trl
Chapel Hill, NC

Provided by: 

Distressing furniture gives it an old look with rustic charm. It's something you can easily do as a weekend project at a fraction of the cost of buying it already distressed. Follow these steps to distress furniture.

STEP 2:

Apply primer. Any finishing project includes a coat of primer. It acts as a great base and helps the paint to adhere evenly to your piece. Apply the primer in the direction of the grain, allow it to dry, and then lightly sand any bumpy areas with fine-grit sandpaper. You don't want to remove the primer. You just want to sand down any bumps so that the surface is smooth. Again, wipe down and vacuum the whole piece.

STEP 3:

Apply paint. Once the primer is dry, you can apply your coat of paint. This paint is the key element in the process of distressing furniture. Make sure the paint is water-based (like the primer). Now it's time to distress your furniture.

STEP 4:

Distress. When you distress furniture, you're basically making it look old and loved. In order to do this, you will need to go against everything your mother taught you and set about damaging your furniture! Start by sanding the edges of the pieces to remove some of the paint color. It's okay to make rounded edges flat, or make dings and notches in your furniture. That's all part of the process. Sharp corners need to be sanded, as do any flat surfaces. Use an ice pick or a round tool to simulate holes in the wood. And take a hammer to flat surfaces to indicate wear and tear. If you are really looking for a worn-out look, you might even consider dragging your furniture across some gravel. The amount of distressing you do really depends on how distressed you want your piece to look. There's really no wrong approach to distressing furniture.

Click here to visit HowToDoThings.com

Featured Local Company

Certapro Painters of Durham Chapell Hill

(919) 806-2244
4324 S Alston Ave
Durham, NC