How to Install a Laminate Floor Phoenix AZ

The room is emptied, the under floor prepared, the material purchased, delivered and you are ready to start. Don't rush; take your time. A laminate floor can provide years of comfort and strength, ready to stand up to real family abuse.

Local Companies

Az Floor Company
602-790-8816
Shop At Home Services
Phoenix, AZ
Dynamic Floors Phoenix, Inc.
(602) 843-9040
4229 W. Thunderbird Rd.
Phoenix, AZ
Modern Finishes
(480) 234-0303
7743 W Dreyfus
Peoria, AZ
Floors N More
(623) 972-5641
9855 W. Bell
Sun City, AZ
Arizona Flooring Solutions, LLC
(623) 930-7181
9015 W. Union Hills
Peoria, AZ
Big D Floor Covering
(602) 283-0981
2501 W Phelps Rd
Phoenix, AZ
Designer Floors
(602) 278-5999
1820 N 25th Dr
Phoenix, AZ
Big D Floor Covering
(602) 283-0927
4645 S 35th St
Phoenix, AZ
M & I Flooring
(602) 371-0600
1247 E Northern Ave
Phoenix, AZ
Mg Websites
(602) 433-0182
4020 Grand Ave
Phoenix, AZ

Provided by: 

The room is emptied, the under floor prepared, the material purchased, delivered and you are ready to start. Don't rush; take your time. A laminate floor can provide years of comfort and strength, ready to stand up to real family abuse.

STEP 2:

Sound protection. Lay the fist row of sound proofing underlay. Here the rows are not allowed to overlap, otherwise you bring uneven points in which let your floor sound hollow and could cause some damage.

STEP 3:

Floor expansion. Allow 1/3 to 3/4 inches for expansion between the floor and wall, as well as around all other items like pipes and supports. The shortest joints should be at least 8 inches. The board connections must overlap each other from row to row. The distance should be at least 8 inches. This will provide additional strength for the floor. Use the leftover piece of a row as first one in the next to save material.

STEP 4:

Start the first two rows. Begin installing the first row from the left to the right of the room with both tongue sides to the wall.

STEP 5:

Measure the room. First calculate the width of the last row. If required cut the first row lengthwise to avoid getting the last row too narrow.

STEP 6:

Install second row. Connect the second one by placing the interlocking end of the panel to the already installed at an angle and then lower it to lock. Don't forget to place the spacers again. Continue until you reach the last panel of the first row.

STEP 7:

Install the last board. Place the last board of the row upside down on the row and move the tongue to the spacers at the wall. Mark both sides of the panel length with a pencil and connect the two small stripes to a line. Cut the board directly on the line, grain the cutter edges a bit and install the board.

STEP 8:

Repeat until finished. After you have made all installation adjustments and patterns, simply repeat the process until the full floor is covered.Laminate flooring is a snap to install. Follow the directions provided and if you have any questions, ask. Many hardware stores have professionals on staff that you could use if you run into a major problem. Sit back, relax and know you have installed a great-looking floor that will last for years.

Click here to visit HowToDoThings.com

Featured Local Company

Az Floor Company

Flooring Arizona? You Found US! Your goto guys in Phoenix for Hardwood, Tile, Laminate & Carpet.. for LESS

602-790-8816
Shop At Home Services
Phoenix, AZ
www.azfloorcompany.com

Hardwood Flooring
Carpet Flooring
Tile Flooring
Laminate Flooring

www.azfloorcompany.com
Flooring Arizona?

Related Local Events
BCMC - Building Components Manufacturing Conference - 2009
Dates: 9/30/2009 - 10/2/2009
Location: Phoenix Civic Plaza
Phoenix, AZ
View Details

Commercial Construction Show
Dates: 6/2/2009 - 6/4/2009
Location: Phoenix Convention Center
Phoenix, AZ
View Details