How to Understand the Electromagnetic Spectrum Dallas TX

Provided By:

Steps

Part 1: Researching

1. Begin with naming all the parts. There are 8 parts to the Electromagnetic Spectrum. They are:

• Radio Waves
• Microwaves
• Terahertz Radiation
• Infrared Light (IR)
• Visible Light
• Ultraviolet Rays (UV)
• X-Rays
• Gamma Rays

By understanding these names, you will need to know its range. Below is showing a table of the range. The Range of the Electromagnetic Spectrum Type of Radiation Range Radio Waves 1 millimeter to 100,000 kilometers Microwaves 1 millimeter to 1 meter Terahertz Radiation 100 micrometers to 1 millimeter Infrared 0.7 micrometers to 1 millimeter Visible Light 400 nanometers to 700 nanometers UV Rays 10 nanometers to 400 nanometers X-Rays 100 picometers to 10 nanometers Gamma Rays 1 picometer to 1 nanometer2. Take each part, one by one, and dig very deep into the soil. Read on if you want to find out about the general idea and the detailed information that you can learn from. Radio Waves

1. Learn what items use radio waves. Many things use this kind of radiation. They are all listed below.
   • Submarines
   • Mines
   • Time signals
   • AM Radio
   • Shortwave Radio
   • FM Radio
   • Amateur Radio
   • Line-of-sight ground-to-aircraft and aircraft-to-aircraft communications
   • TV
   • Mobile phones
   • GPS
   • Radio astronomy
2. Learn what the range of the radio waves that are listed above. You can research it on the internet. You don't have to memorize all of the things that use radio waves and what range that it uses, but it is vital to actually have a general idea.
3. Store your data in a place where you can remember. A folder stored in a drawer is the best idea, but other ideas are good too. Also, below is how things work with radio waves (the y in the picture is short for gamma rays). Do this step last after every section.

Microwaves

1. Learn what items use microwaves. Certain objects use this kind of radiation, but not very many (at least not as many as radio waves). Microwave energy is produced with klystron and magnetron tubes, and with solid state diodes such as Gunn and IMPATT devices. Microwaves use microwaves to heat up food. They are actually absorbed by the water, sugar, and fat in the food, and that is why they heat up. The plate stays cool since it doesn't have any water or fat. The power level varies on the energy of the microwave.
2. Understand how they work. You only need to get the general idea. For example, for microwaves, you only need to know that the microwaves are absorbed by water, sugar, and fat when heating them up. You don't need to know about how it works, or the complex algebra that it uses. If you do this, it will be very hard to remember (which will be discussed later) and you might fail. It is best to remember some detailed information that you can remember, but not the ones you can't.
3. Understand why it is used. For example, microwaves are used for heating up food depending on the power level. If items were invented, and they were never used, would it be some extra item taking up space?

Microwave Radio Relay

1. Relay microwave radio and television and other signals in a technology for transmitting digital and analog signals. This technology includes transmitting telephone calls and the relay of television programs to transmitter antennas, between two locations on a "line of sight path." In microwave radio relay, radio waves are transmitted between the two towers at locations with directional antennas, forming a fixed radio connection between the two points. Long chained series of such links form transcontinental telephone and/or television communication systems.
2. Maintain a line of sight radio link as the microwave radio frequencies used can occupy only a narrow path between antennas (with the exception of a certain radius of each station). Antennas used must have a high directive effect; these antennas are installed in elevated locations such as large radio towers in order to be able to transmit across longer distances without obstructions in the path.[1]

Infrared

1. Learn what items use Infrared waves. It includes cameras, tracking, night vision, and remotes. There are many more things that use infrared waves, but the 4 listed above is a good start. Later on, you can research more on Wikipedia. If you want to understand how these work, you can teach other people, and you might become an engineer. However, most people don't do that, and merely gets it into their thought.
2. Understand why and how it is used. Again, you don't need to know about the "scientific method," but you can get some information about how the geo-thermal technology works in order to determine the temperature of something. For cameras which use infrared light waves of about 1-20 micrometers, you should understand how it works and where the infrared light will come in.

Sources and Citations

1. ? Microwave Radio Relay

Article provided by wikiHow, a wiki how-to manual. Please edit this article and find author credits at the original wikiHow article on How to Understand the Electromagnetic Spectrum. All content on wikiHow can be shared under a Creative Commons license.

Simple Organization Systems

703-929-5803
3818 Cedar Springs Road
Dallas, TX
http://www.simpleorgsystems.com