How to build a pergola Charlotte NC

Design a functional piece of wooden art for your deck or patio.

Local Companies

J.D. Home Improvements
704-961-7636
517 willoughby st
Charlotte, NC
Charlotte Sheds
704-340-3343
Charlotte
Charlotte, NC
Charlotte Garage Door
(704) 253-4828
497 W 5th St
Charlotte, NC
Acosta Heating & Cooling
704-527-1889
3915 Stuart Andrew Blvd.
Charlotte, NC
Mr Glass
704-333-2217
P.O. Box 10365
charlotte, NC
Pressure Washing Charlotte| Free Est 704-806-3002
704-806-3002
Rea
charlotte, NC
Lansing Building Products
(704) 202-8829
3000 Crosspoint Center Lane
Charlotte, NC
Lansing Building Products
(704) 202-8829
3000 Crosspoint Center Lane
Charlotte, NC
The Hardwood Giant of Charlotte
704-438-6890
Charlotte, NC
PCS
704-2989-6490
11600 OLD SURRY LANE
CHARLOTTE, NC

What you’ll need

Materials and tools needed to build a pergola on your deck that stands 8 feet high by 10 feet wide and 10 feet deep: 4x4 pieces of lumber cut to four 96-inch lengths and four additional lengths that you will cut to fit your pergola’s unique measurements; 2x4 pieces of lumber cut to 11 120-inch lengths; 2x6 pieces of lumber cut to 6 120-inch lengths; circular saw; compound miter saw; power drill; power sander; measuring tape; paint or stain.

 

Install posts

Stand one of the 4x4 posts upright and screw it into the deck’s floor. You will need to use a metal half base, a piece of equipment made specifically for this use. You can find the half base at your local hardware store. Repeat this step for the remaining three 4x4 posts.

 

Secure boards

With an assistant, lift one of the 120-inch 2x4 boards and secure it to the two corner posts located on the interior side of your future pergola. The board should be secured flush to the tops of the posts.

 

Install cross braces

Now you are ready to install your cross braces. Measure diagonally between the interior side of the 4x4 and the top surface of the 2x4. Using your miter saw, cut four cross braces from the remaining 4x4s using the measurements you’ve taken. Secure one cross brace to one of the 4x4 posts and to the side of the 2x4 facing away from the pergola’s interior. Repeat this step on the other end of the 2x4, cross-bracing it to the other post. Screw the second 120-inch 2x4 to the exterior side of the pair of 4x4 posts and to the existing cross braces.

Repeat steps three through six for the second set of 4x4s, using two more 120-inch 2x4s and two more cross braces.

 

Build the rafters

Next, it’s time to build the pergola’s rafters. Lay six of the 120-inch 2x6 pieces of lumber perpendicularly across the supporting 2x4s, spacing them out evenly. Uses screws to secure them in place. Lay the remaining seven 2x4s perpendicularly across the 2x6s, spacing them evenly. Screw them to secure in place.

The information for this project came from www.homedepot.com.

 

SIDEBAR

Five other ideas

Path Build a garden path

Patio Create a small concrete patio

Plants Add new shrubbery and perennials to the front of your home

Pond Build a small fish pond for your backyard

Pit Build an outdoor fire pit

author: By Dan Rafter

Featured Local Company

J.D. Home Improvements

704-961-7636
517 willoughby st
Charlotte, NC

Related Local Events
Charlotte Spring Home Show
Dates: 1/22/2010 - 1/24/2010
Location: Metrolina Tradeshow Expo
Charlotte, NC
View Details

American Coatings SHOW - Exhibition and Conference for the Paint and Coatings Industry
Dates: 4/13/2010 - 4/15/2010
Location: Charlotte Convention Center
Charlotte, NC
View Details

Charlotte Fall Home Show
Dates: 10/9/2009 - 10/11/2009
Location: Metrolina Tradeshow Expo
Charlotte, NC
View Details