How to build a pergola Darlington SC

Design a functional piece of wooden art for your deck or patio.

Local Companies

Seegars Fence Company, Inc. of Florence
843-667-3232
1518 Douglas Street
Florence, SC
Doc Allbright Pressure Washing
843-673-1006
205 E Thorncliff Rd
Florence, SC
Williamson Home Improvements & Builders
(843) 393-6053
1529 Elissa Dr
Darlington, SC
G & S Construction Co
(843) 393-6212
1929 Iseman Rd
Darlington, SC
Regions Home Improvement
(843) 342-2838
35 Marshland Rd
Hilton Head, SC
Jewell Builders
(803) 957-5426
Lexington, SC
Hawkins Siding & Windows
(864) 294-7981
Greenville, SC
Cummings Painting Service
(864) 269-8171
112 Side Ln
Greenville, SC
Kalman Construction Co
(843) 856-0515
Mount Pleasant, SC
Region's Inc
(843) 342-2838
Hilton Head Island, SC

What you’ll need

Materials and tools needed to build a pergola on your deck that stands 8 feet high by 10 feet wide and 10 feet deep: 4x4 pieces of lumber cut to four 96-inch lengths and four additional lengths that you will cut to fit your pergola’s unique measurements; 2x4 pieces of lumber cut to 11 120-inch lengths; 2x6 pieces of lumber cut to 6 120-inch lengths; circular saw; compound miter saw; power drill; power sander; measuring tape; paint or stain.

 

Install posts

Stand one of the 4x4 posts upright and screw it into the deck’s floor. You will need to use a metal half base, a piece of equipment made specifically for this use. You can find the half base at your local hardware store. Repeat this step for the remaining three 4x4 posts.

 

Secure boards

With an assistant, lift one of the 120-inch 2x4 boards and secure it to the two corner posts located on the interior side of your future pergola. The board should be secured flush to the tops of the posts.

 

Install cross braces

Now you are ready to install your cross braces. Measure diagonally between the interior side of the 4x4 and the top surface of the 2x4. Using your miter saw, cut four cross braces from the remaining 4x4s using the measurements you’ve taken. Secure one cross brace to one of the 4x4 posts and to the side of the 2x4 facing away from the pergola’s interior. Repeat this step on the other end of the 2x4, cross-bracing it to the other post. Screw the second 120-inch 2x4 to the exterior side of the pair of 4x4 posts and to the existing cross braces.

Repeat steps three through six for the second set of 4x4s, using two more 120-inch 2x4s and two more cross braces.

 

Build the rafters

Next, it’s time to build the pergola’s rafters. Lay six of the 120-inch 2x6 pieces of lumber perpendicularly across the supporting 2x4s, spacing them out evenly. Uses screws to secure them in place. Lay the remaining seven 2x4s perpendicularly across the 2x6s, spacing them evenly. Screw them to secure in place.

The information for this project came from www.homedepot.com.

 

SIDEBAR

Five other ideas

Path Build a garden path

Patio Create a small concrete patio

Plants Add new shrubbery and perennials to the front of your home

Pond Build a small fish pond for your backyard

Pit Build an outdoor fire pit

author: By Dan Rafter

Featured Local Company

Seegars Fence Company, Inc. of Florence

843-667-3232
1518 Douglas Street
Florence, SC