If you need or want to replace your kitchen faucet, here on some instructions on how to replace it:
First, make sure you have all the parts necessary. This includes a new faucet, an adjustable wrench, flat-head and Phillips screwdrivers, washers, screws, bolts and nuts in a variety of sizes, small wire brush, old toothbrush, baking soda and rags. Faucets can be purchased from any home improvement store, and should already come with the hardware you might need. You may also need to take the old faucet with you to match sizes for parts.
To remove the faucet already installed, you'll need to unscrew the handles and everything holding it in place. You can expose the screws by popping off the plate holding the handle in place, or they might be located under the cabinet the sink is on if the faucet is all in one piece.
Once the old faucet is off and a new one is purchased, turn the water off at the kitchen sink. The shut-off valve should be right under the sink in the cabinet or stand the sink is on. Water might drip or pool under the sink, so be sure to use the rags or cloths to soak up any excess water that might be standing.
Now that the water is shut off and the old faucet removed, you'll need to clean the area around where the faucet sits. It's more than likely caked with grease, rust and dirt, so use the small wire brush or toothbrush to scrub the gunk away. If it's not coming off easily, try mixing a little of the baking soda with water and using it as a paste to scrub the dirt away. Make sure to rinse thoroughly when done, and dry well with the rags.
Take the new faucet out of the packaging and set it in the space left by the old faucet, making sure all handles and parts line up appropriately. If the faucet is one piece, it should just settle into the space without fitting. Use the screwdrivers, wrenches, and whatever parts are needed to tighten the faucet down, according to the instructions provided with the faucet kit. Be sure to replace any heads or nozzles that were present on the old faucet.
Use caulk to seal around the faucet to prevent leaks, and turn the water back on to check for leaks. If no water seeps out, you've done a good job installing your new kitchen faucet.
Click here to visit HowToDoThings.com