Making Foam Machines Fairbanks AK

Steps

1. Buy some fish supplies- a fish tank air pump, the smallest one will do, some rubber tubing, and an air stone (the little cyllinder thing that makes the bubbles).
2. Hook it up. Attach the tubing to the air stone on one end and the pump on the other.
3. Fill a container of any size (water bottle, tea kettle, toilet, etc.) with water and a couple squirts of liquid hand soap, no need to mix.
4. Insert the air stone into the container.
5. Place container away from pump and other electric devices.
6. Plug it in. Most air pumps dont't have switches. Just plug it in.
7. Figure out somewhere to put it.

Tips

• Use about four squirts of soap per quart/liter of water.
• A water bottle's worth of the fluid will last about 15 minutes before the water gets below the air stone. Make sure the air stone is all the way at the bottom of the container for best results.
• If you're putting it in an office environment(like a desk drawer), make sure to remove anything that could be damaged by the soap and possibly spilled water like important documents.

Warnings

• You're dealing with water and electricity. Water conducts electricity. Just don't be stupid.

Article provided by wikiHow, a wiki how-to manual. Please edit this article and find author credits at the original wikiHow article on How to Make a $9 Foam Machine. All content on wikiHow can be shared under a Creative Commons license.