Networking Your Home Computers Washington DC

Easy Guide on Networking your Home Computers

Let's say you have 3 desktop computers at your home. One in your kid's room, in your home-office and one in your family room. Your idea is to have all these 3 computers connect to the internet. One computer has an internet connection on a DSL or cable modem (this is just a terminology for that little box that you connect from the phoneline or cable port!).

So you want all these 3 computers connect to the internet, share files? print from any of this computer?

Here are your step-by-step guide:

(1) Your DSL or cable internet service already comes with a modem. This is a connection from your phoneline to the modem. And then, you will notice your computer#1's network cable directly connect to this modem called the Ethernet port (or on the USB port).

(2) For the other 2 computers to share internet connection, you must have a router with 4 ports (at least!) --- looks like a telephone ports. There are a lot of router brands, one is Linksys and is my favorite. But as I have said there are a lot of different brands out there!

You must buy a network cable if you don't have one. You can buy it from most electronic store.

(4) Here we go! (considering ofcourse we are networking a Window-based computers-- Windows XP (home & professional) and Windows 2000 and higher)

(5) Connect a network cable on your router (port name: "internet" or "ethernet" - this is usually a separated port from the other 4 ports). The other end of the network cable will directly be connected to the DSL or Cable modem's (port name: "ethernet").

(6) Connect a network cable on each computer that you want to get connected to the internet-- (connect this cable at the back of the computer (port name: ethernet).

(7) The other side of each of this network cable will then be connected on each of the port on the router

(8) Now you are ready to be connected! -- turn on your dsl/cable modem. Make sure all lights are on and solid. Turn on your router.

(9) Then turn on your computer(s) -- make sure the light at the back of the computer is blinking! (this is a good sign that you are connected on the network!)

(10) Then set up your router which is normally you choose the proctocol PPoE and just enter your username and password supplied to you by your internet service provider. Oh! by the way, depending on the router, the admin window of the router is on the manual. It's so easy to find it. Trust me.

(11) If your username and password provided to you by your internet service provider is valid... then you should be connected to the internet!.Go and start browsing the internet!

About the Author:

Pinky Mcbanon is an experienced Medical Biller and Coder based in New York. A graduate of Bachelor Science in Computer Engineering. A Medical Practice Billing Consultant. She shares her expertise and knowledge with http://www.medclaimsplus.com. Read more about the author as she share her knowledge and expertise in her field by visiting her website at http://www.justmypassion.com

Article Source:

thePhantomWriters Article Submission Service

Evergreen Computer Services, Inc

(301) 758-2986
12421 Alamanco Way
Washington, DC