POWER-LIMITED FIRE ALARM CABLES CONTINUED Austin TX

The following contains home security information you should know about power-limited fire alarm cables. Read on if you or a loved one is interested in home improvement and security in Austin.

Local Companies

ASI Protection Services
512-467-2615
5555 N Lamar Suite C115
Austin, TX
Elite Systems
512-716-9551
PO Box 143208
Austin, TX
Allied Security Links
512-902-3679
7500 Lobelia Dr
Austin, TX
Austin Sunshades & Window Tinting
512-249-8468
12217 Roxie Dr Ste B
Austin, TX
Vehicle Tracking Solutions
512-433-0359
1400 Avery Ranch Blvd Suite C20059
Austin, TX
Protect American, Inc.
800-639-9012
5100 IH 35 N, Suite B
Round Rock, TX
Chubb Security Systems Inc
(512) 977-5140
11500 Metric Blvd Ste 310
Austin, TX
Chubb Security Systems Inc
(512) 977-5115
11500 Metric Blvd Ste 310
Austin, TX
Chubb Security Systems Inc
(512) 977-5154
11500 Metric Blvd Ste 310
Austin, TX
Chubb Security Systems Inc
(512) 977-5112
11500 Metric Blvd Ste 310
Austin, TX

provided by: 

DIGGING FOR AN ANSWER TO UNDERGROUND CABLE

Q As a follow up to last month's questions on Power-Limited Fire Alarm Cables (FPL), is there a requirement to use FPL in conduit that is installed underground from one building to another building? The Authority Having Jurisdiction (AHJ) says I always have to use "fire alarm cable."

A No. Type FPL is meant to be installed exposed in a building, and when following the rules from Article 760.15, Part B, conduit isn't necessary. To be given the FPL designation is to indicate that the conductor's insulation/jacket will be "resistant to the spread of fire," which is not a factor with buried cable.

Therefore, since FPL is not approved for "wet locations" and there is no such thing as "direct burial FPL cable," you are left with choosing one of three methods. Which method you choose will probably depend on how much you like to dig:

METHOD #1.METHOD #2.METHOD #3.
Use Direct Burial Cables or Conductors.Use Nonmetallic Raceways Listed for Direct Burial Without Concrete Encasement or Other Approved Raceways.Use Rigid Metal Conduit or Intermediate Metal Conduit.
Only copper conductors are permitted for fire alarm use (stranded or solid).Cables and insulated conductors installed in enclosures or raceways in underground installations shall be listed for use in wet locations.Cables and insulated conductors installed in enclosures or raceways in underground installations shall be listed for use in wet locations.
310.7 Direct burial cables or conductors. Conductors used for direct burial applications shall be of a type identified for such use.i.e. MTW, RHW, RHW-2, TW, THW, THW-2, THHW, THHW-2, THWN, THWN-2, XHHW, XHHW-2, ZW (or Direct Burial cables).i.e. MTW, RHW, RHW-2, TW, THW, THW-2, THHW, THHW-2, THWN, THWN-2, XHHW, XHHW-2, ZW (or Direct Burial cables).
Bury it at least 24 inches deep.Bury it at least 18 inches deep.Bury it at least 6 inches deep.

GREG KESSINGER, SET, CFPS, president of an alarm installing company since 1981, teaches NICET training classes to fire alarm system designers and installers and continuing education seminars for Ohio's fire alarm inspectors. You can reach him at 888-910-2272; e-mail: Greg@firealarm.org; or visit his website at www.FireAlarm.org.

author: By Greg Kessinger


Featured Local Company

ASI Protection Services

512-467-2615
5555 N Lamar Suite C115
Austin, TX
http://www.asiprotection.com