POWER-LIMITED FIRE ALARM CABLES CONTINUED Milwaukee WI

The following contains home security information you should know about power-limited fire alarm cables. Read on if you or a loved one is interested in home improvement and security in Milwaukee.

Local Companies

DigiCorp
414-343-1095
2322 W Clybourn
Milwaukee, WI
Warehouse Electronics / Exclusive Audio & Wheels
414-562-0880
1400 W North Ave
Milwaukee, WI
Milwaukee Alarm Company Inc
414-271-8800
214 E Florida St
Milwaukee, WI
Elite Audio Video & Security
414-801-2101
2323 W Ohio Ave
Milwaukee, WI
Care Security Systems Inc Burglr Alarm
414-351-5366
2415 W Suelane Rd
Milwaukee, WI
Midwest Security & Fire Inc.
414-727-1946
9431 W Beloit Rd Ste 214
Milwaukee, WI
Occupational Fraud Interventions Inc
414-817-1000
9401 W Beloit Rd Suite 106
Milwaukee, WI
United Security Services
414-817-0000
9401 W Beloit Rd Suite 106
Milwaukee, WI
Truck Outfitters
262-790-9170
12630 W Custer Ave
Milwaukee, WI
Home Protective Services Inc
(414) 466-3440
7833 W Capitol Dr
Milwaukee, WI

provided by: 

DIGGING FOR AN ANSWER TO UNDERGROUND CABLE

Q As a follow up to last month's questions on Power-Limited Fire Alarm Cables (FPL), is there a requirement to use FPL in conduit that is installed underground from one building to another building? The Authority Having Jurisdiction (AHJ) says I always have to use "fire alarm cable."

A No. Type FPL is meant to be installed exposed in a building, and when following the rules from Article 760.15, Part B, conduit isn't necessary. To be given the FPL designation is to indicate that the conductor's insulation/jacket will be "resistant to the spread of fire," which is not a factor with buried cable.

Therefore, since FPL is not approved for "wet locations" and there is no such thing as "direct burial FPL cable," you are left with choosing one of three methods. Which method you choose will probably depend on how much you like to dig:

METHOD #1.METHOD #2.METHOD #3.
Use Direct Burial Cables or Conductors.Use Nonmetallic Raceways Listed for Direct Burial Without Concrete Encasement or Other Approved Raceways.Use Rigid Metal Conduit or Intermediate Metal Conduit.
Only copper conductors are permitted for fire alarm use (stranded or solid).Cables and insulated conductors installed in enclosures or raceways in underground installations shall be listed for use in wet locations.Cables and insulated conductors installed in enclosures or raceways in underground installations shall be listed for use in wet locations.
310.7 Direct burial cables or conductors. Conductors used for direct burial applications shall be of a type identified for such use.i.e. MTW, RHW, RHW-2, TW, THW, THW-2, THHW, THHW-2, THWN, THWN-2, XHHW, XHHW-2, ZW (or Direct Burial cables).i.e. MTW, RHW, RHW-2, TW, THW, THW-2, THHW, THHW-2, THWN, THWN-2, XHHW, XHHW-2, ZW (or Direct Burial cables).
Bury it at least 24 inches deep.Bury it at least 18 inches deep.Bury it at least 6 inches deep.

GREG KESSINGER, SET, CFPS, president of an alarm installing company since 1981, teaches NICET training classes to fire alarm system designers and installers and continuing education seminars for Ohio's fire alarm inspectors. You can reach him at 888-910-2272; e-mail: Greg@firealarm.org; or visit his website at www.FireAlarm.org.

author: By Greg Kessinger


Featured Local Company

DigiCorp

414-343-1095
2322 W Clybourn
Milwaukee, WI
http://www.digicorp-inc.com