SUV Body Lift Pick-up Houston TX

It can be difficult to lift your truck or SUV using a suspension lift. This article will offer advice on creating your own SUV suspension parts and lift kits, so you can avoid expensive off-road accessories shops.

Local Companies

krome dome wheels and tires
713-455-4548
1101 uvalde rd.
houston, TX
Enterprise Rent-A-Car
(281) 550-9925
16130 Clay Rd
Houston, TX
Enterprise Rent-A-Car
(713) 947-2299
9001 Frey Rd Ste F
Houston, TX
Alamo Rent A Car
(713) 641-0533
Houston Hobby Airpor
Houston, TX
Budget Car Rental
(281) 461-8991
108 W Bay Area Blvd
Houston, TX
Enterprise Rent-A-Car
(281) 652-4600
14900 Gulf Fwy
Houston, TX
Toyota Rent A Car
(713) 334-4632
6015 Skyline Dr
Houston, TX
Hertz Local Edition
(713) 799-2065
1313 S Loop W
Houston, TX
Enterprise Rent-A-Car
(281) 580-3222
6115 Fm 1960 Rd W
Houston, TX
Alamo Rent A Car
(281) 209-4900
Houston, TX

Body Lift Procedure

Are you an off-road enthusiast or just a truck and/or SUV fanatic? It can be difficult to lift your truck or SUV using a suspension lift. Although many off-road accessories shops are selling suspension lift kits for every vehicle classification, they aren't easy to use and often will cost big bucks. As an off-road person, I make my own suspension parts and lift kits. A simple body lift is ideal for correcting height problems. Here's how it's done:

What you will need:

  • Body Lift Kit (any brand)
  • Hydraulic jack or a Hi-Lift jack
  • Brake lines extensions
  • Jack stand
  • 1 set socket wrench
  • Adjustable wrench
  • 1 set open wrench
  • Vise grip

Procedure:

  1. Work on the main body frame first (for trucks). Remove the nuts of the body support blocks that support the main body.

    (Note: Body support blocks are rubber blocks that link the body and the chassis.)
  2. Remove the Coolant Radiator Tank and the water hose from the engine bay.
  3. Detach all the fuel lines and hoses that separate the body from the chassis. Remove the fuel hose from the fuel tank.
  4. Disconnect the break lines from the body to the chassis.
  5. Remove the steering rod from the coupler and steering gear box.
  6. Remove the bumper.
  7. Check all of the lines and wiring that connect the body and the chassis. Remove any that are still attached.
  8. Jack the body (not the chassis) about 6-7inch away from the chassis.

    (CAUTION: ALWAYS use the jack stand for support when doing under-chassis work. A hydraulic Jack/Hi-lift Jack may collapse at any time if unsupported, which could cause a very serious injury to the person working.)

    ...

Click here to read the rest of the article at HowToDoThings.com

Author: Huervana Mark Anthony

Featured Local Company

krome dome wheels and tires

713-455-4548
1101 uvalde rd.
houston, TX