Safe Baby Cribs Washington DC

By Sarah Holmes, Ph.D.

A baby crib is most likely at the top of your list of things you will need for your new baby. With all of the different styles and features, it can be a daunting task to pick the safest and best baby crib for your new family member. This article on baby crib safety will review the safety features of baby cribs so that you will be able to pick out the safest baby crib for your baby.

Baby Crib Safety Standards

Currently, every new baby crib that is made must meet the industry standards set by the Consumer Products Safety Commission (CPSC). This means that all new baby cribs, including the least expensive baby cribs, will meet the minimum safety standards.

There are additional voluntary safety standards set by the American Society for Testing and Materials (ASTM). Baby cribs which meet these additional safety standards are certified by the Juvenile Products Manufacture's Association (JPMS). Those baby cribs that earn the JPMA certification will be clearly labeled with this information. So, rest assured that the new baby crib that you are looking at has past the basic safety standards and may have passed the additional voluntary standards set by JPMS.

The fact remains that the majority of you may be considering using an hand-me-down or buying a "previously owned" baby crib. While there are 4 million infants born in the U.S. every year, only about 1 million new baby cribs are sold annually. Some people recommended that you never buy a used baby crib or accept a hand-me-down baby crib. If you want to be 100% sure that your baby crib meets all of the current safety standards, then the best beat for you is to buy a new baby crib. Keeping in mind that approximately 26 infants die and another 11,500 are hospitalized every year due to baby crib related injuries, the majority of these tragedies do occur with older baby cribs. This being said, it is possible to test a used baby crib to see it if meets the current minimum safety standards. First, check to see if the baby crib has been recalled (www.recalls.gov). Assuming it has not been recalled, then check to see if your baby crib meets these simple minimum baby crib safety standards to ensure your baby crib is a safe place for your baby.

Minimum Baby Crib Safety Standards

1. The vertical bars or slates must be no further apart than 2 3/8" wide.

   If the space between the baby crib bars or slates is wider than 2 3/8 inches, then a baby can squeeze its body into that space and get stuck. How to test this standard? You can either measure this space with a tape measure or try to fit a can of soda through the baby crib bars. Since soda cans are about 2 3/8" in diameter, this is an easy test to see if a baby crib meets this baby crib safety standard. If the soda can fits, the baby crib is unsafe and should be destroyed.

2. The baby crib should have no design cutouts wider than 2 3/8" in the headboard or footboard of the baby crib.

   Again, the danger is when a baby can lodge himself in that cut out area. It is best to avoid baby cribs with cutout areas all together. While they add a decorative flair to the baby crib, they also add a potential hazard to the baby crib.

   Click here to read more from Pregnancy.Org